How to change receipt paper Ingenico?

A thermal printer is integrated into the Moneris Mobile 8200 terminal. It prints black text on white, one-part thermal paper.

Note: The maximum paper roll diameter is 2 inches.

Loading a new paper roll into the terminal

To load a new paper roll into the paper well on the terminal:

1. Open the paper well at the back of the terminal.
Press the printer latch towards the back of the printer then lift the printer lid up and back.

2. Remove the paper roll that is in the paper well.

3. Place the new paper roll into the paper well with the loose end unrolling from the bottom of the roll towards the front of the terminal.

4. Pull the loose end of the paper towards the front of the terminal at least one inch (2.2 cm) past the metal teeth at the front of the paper well.

5. Close the printer lid and press firmly on it to ensure that it is securely latched.

6. Tear off the loose end of the paper by pulling it towards the keypad.

The printer is ready to print again.

Note: If the printer ran out of paper in the middle of a receipt or report, you can reprint the receipt or report.